Skip to content

10 years in business. A free look and a photo report: (919) 443-6193

(919) 443-6193
Worker on an aluminum extension ladder drilling a fastener into a white aluminum gutter along the eave of a brick house, with a white downspout nearby

ServicesGutters

Gutters in Mebane, NC

Your gutters decide where every rain ends up. We form aluminum runs on site and match each one, with its downspouts, to the stretch of roof it serves. Thicker metal, concealed hangers and larger downspouts add a little to the first bill and save years of sagging, spills and ladder repairs.

Where gutters fit with your roof

Every rain, your roof sends water toward the eaves, and the gutters decide where it goes next. When they fall short, the trouble usually turns up somewhere else: rotted fascia, streaked siding, a damp crawlspace or soil eroding beside the foundation.

So we handle gutters as the final part of the roof rather than an afterthought. Before hanging anything, we check the drip edge and fascia, size each gutter to the roof area feeding it, and put downspouts where water has somewhere to go. Clay soil in the Piedmont soaks up water slowly, so the landing spot deserves as much thought as the route.

The advice stays consistent from one job to the next. We weigh what a system costs today against its lifespan and the cleaning it will ask of you, and when your current gutters just need adjusting, we tell you that directly.

What a gutter job with us includes

Runs formed in your driveway

A machine on our trailer shapes each length from a coil of aluminum, cut to fit your eave. Seams show up only at corners and outlets, which leaves far fewer places to drip or need fresh sealant later.

.032 aluminum on hidden hangers

We favor the heavier gauge, held by screw-in concealed hangers spaced roughly two feet apart. That keeps the gutter straight under wet leaves and snug to the fascia, where old spikes and ferrules tend to work loose.

Slope set by level

We drop each run gently toward its outlet, roughly a quarter inch over ten feet of length. A gutter set too flat holds standing water, and one set too steep lets a heavy rain jump the corner.

Downspouts sized to the roof

Larger roof sections get 3x4 downspouts in place of the common 2x3. Every outlet ends in an extension or splash block that sends water out away from the foundation.

Fascia and drip edge review

We press-test the fascia for soft wood and confirm the drip edge sends water into the gutter, not behind it. Any boards that need replacing appear in your photos and on their own estimate line.

Guards where they pay off

Below heavy oak or pine, a good guard turns cleaning into an occasional rinse. On an open lot, we'll tell you a guard may not be worth the cost.

Roofer in a safety harness on a ladder at the eave, photographing worn asphalt shingles and a pipe vent boot on a brick home with a phone

When your gutters are asking for help

Overflow in an ordinary rain
If water sheets over the lip in a steady shower, the cause is usually a clog, a run that has lost its pitch or a gutter too narrow for the roof above it.
Droop or gaps at the eave
Worn hangers let a section sag and tip outward. Rain then runs down behind the gutter and soaks the wood it hangs from.
Stained or soft fascia
Dark streaks, peeling finish or spongy spots behind the gutter mean the boards have stayed wet for a while. Caught early, it's usually a board or two to replace.
Eroded beds or moisture below the house
Grooves cut through mulch under the eaves, or a damp crawlspace, often trace back to downspouts that empty right against the foundation.
Leaks at seams and corners
Sectional gutters begin to drip at their joints once the caulk dries out and cracks. Resealing holds for a season or so, while continuous runs remove most of those joints entirely.

How the work goes

  1. 1

    Inspection and photo report

    We walk the eaves, look over the roof edge and measure every run. Then you get a photo report of our findings, fascia and drip edge included.

  2. 2

    A written, line-item estimate

    Gutter width, gauge, downspouts, guards and any wood repair each get their own line, so you can see what every choice adds and keep only what's worth it to you.

  3. 3

    Installation day

    We take down the old gutters, make the agreed fascia repairs, then form and hang the new runs. Weather permitting, most homes are done in one day.

  4. 4

    Flow check and cleanup

    Before we leave, a hose goes into each run so we can watch water reach every outlet. The old metal leaves with us, and we sweep the lawn and beds for stray screws and trimmings.

What sets the price of new gutters

Most of a gutter price comes down to linear feet and what goes into each foot. Our estimates list every part separately, so you can set the cost of an upgrade against the years it adds and the cleaning it spares you. These are the pieces that move the total.

Footage and height
How many feet of eave you have and how many downspouts it needs account for the bulk of the price. Second-story runs take longer to stage and hang than ground-floor ones.
Gutter width and metal thickness
Six-inch profiles and .032 aluminum cost more than five-inch and lighter stock. In return they move more water in a hard storm and shrug off the dents left by ladders and falling branches.
Condition of the fascia
Any soft or rotted board must be replaced before a new gutter can hang from it. Some damage stays hidden behind the old metal until it's removed, so we photograph what we uncover and price it as its own line.
Guards and drainage add-ons
Gutter guards, longer extensions and buried drain lines each carry their own cost. On some lots they pay for themselves and on others they don't, and we'll tell you which applies to yours.

Gutter questions we hear often

Can my existing gutters be repaired instead of replaced?
Often they can. Rehanging a drooping run, resealing a leaky corner or resetting the slope costs far less than a whole new system. If the metal is still sound, that's what we'll recommend. If it's thin, dented and dripping at every seam, those repairs tend to come back, and we'll show you why in the photos.
Should my gutters be replaced at the same time as my roof?
If the gutters are near the end of their life, doing both together is usually the better value. The new drip edge and gutter line up correctly from day one, and you pay for one setup instead of two. Architectural shingle roofs we install carry a 5-year workmanship warranty, and our roof replacement page explains how we schedule the gutter work alongside it.
Are gutter guards worth it?
Under heavy tree cover, usually. They cut down on clogs and the ladder trips that follow. With only a few trees near the house, a yearly cleaning may cost less over the life of the gutters, and we'll tell you that plainly.
Do you handle storm-damaged gutters for insurance claims?
Yes. Dented or torn gutters often belong on a storm claim together with the roof. We meet with the adjuster and help you through the insurance claim process. Our storm damage repair page has more on how that works.
How long have you been doing this work?
We've been in business 10 years, and we're a BBB Accredited Business holding an A+ rating. If you'd rather spread the cost out, financing is available through Acorn Finance.
Aerial view of a brick ranch home with a new charcoal shingle hip roof and vents, with a ladder, trash bags and a box on the front lawn

See what your gutters are telling you

We'll look over the gutters, fascia and roof edge, then send a photo report so you can decide with the facts in hand. We work in Mebane and nearby towns including Graham, Burlington and Hillsborough.